MAX4014EUK+T

MAX4014EUK+T is a low-cost, high-speed, single-supply, gain of +2 buffer with rail-to-rail outputs in SOT23-5 package. It features high slew rates, high output current drive, and low differential gain and phase errors. This single-supply device operates from +3.15V to +11V, or from ±1.575V to ±5.5V dual supplies. The input voltage range extends 100mV beyond the negative supply rail and the outputs swing rail-to-rail. This device requires only 5.5mA of quiescent supply current while achieving a 200MHz -3dB bandwidth and a 600V/µs slew rate. Input voltage noise for these parts is only 10nV/√Hz and input current noise is only 1.3pA/√Hz. This buffer family is ideal for low-power/low-voltage applications that require wide bandwidth, such as video, communications, and instrumentation systems. Applications include portable/battery-powered instruments, video line driver, analogue-to-digital converter interface, CCD imaging systems, video routing and switching systems.

• Internal precision resistors for closed-loop gains of +2 or -1
• High speed, outputs swing rail-to-rail
• Input voltage range extends beyond VEE
• Low differential gain/phase: 0.04%/0.02°
• Low distortion at 5MHz: -78dBc spurious-free dynamic range, -75dB total harmonic distortion
• High output drive: ±120mA, low 5.5mA supply current
• 400µA shutdown supply current
• One op-amp, operating temperature range from -40°C to +85°C
• 4mV typical input offset voltage (RL = 50 ohm), 5.4µA input bias current, 2V/V voltage gain
• 200MHz small-signal -3dB bandwidth (VOUT=20mVp-p), 140MHz large-signal -3dB bandwidth (VOUT=2Vp-p)

Uwagi

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party