LTC1754ES6-3.3#TRMPBF

LTC1754-3.3 is a micropower charge pump DC/DC converter that produces a regulated output. Extremely low operating current and a low external parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) make the device ideally suited for small, battery-powered applications. It operates as a Burst Mode™ switched capacitor voltage doubler to produce a regulated output. It has thermal shutdown capability and can survive a continuous short circuit from VOUT to GND. It is widely used in application such as SIM interface supplies for GSM cellular telephones, white LED power supplies, Li-Ion battery backup supplies, handheld computers, smart card readers, PCMCIA local 5V supplies etc.

• Input supply voltage is 2V to 4.4V
• Operating supply current is 11µA typical at (2.0V ≤ VIN ≤ 4.4V, IOUT = 0mA, SHDN = VIN)
• Output ripple is 23mVP-P typical at (VIN = 2.5V, IOUT = 40mA)
• Efficiency is 82% typical at (VIN = 2.0V, IOUT = 20mA)
• Switching frequency is 600KHz typical
• Shutdown disconnects load from VIN, output voltage is 3.3V
• Ultra small application circuit
• Short-circuit and overtemperature protected
• Very low shutdown current is 1µA maximum at (VIN ≤ 3.6V, IOUT = 0mA, VSHDN = 0V)
• Operating temperature is -40°C to 85°C, package style is 6-lead plastic SOT-23

Uwagi

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party