MAX96705GTJ/V+

MAX96705GTJ/V+ is a 16bit GMSL serializer with high-immunity/ bandwidth mode and coax/STP cable drive. In high-bandwidth mode, the parallel-clock maximum is 116MHz for 12bit linear or combined HDR data types. The embedded control channel operates at 9.6Kbps to 1Mbps in UART, I²C, and mixed UART/I²C modes, allowing the programming of serializer, deserializer, and camera registers independent of video timing. For driving longer cables, the IC has programmable pre/deemphasis. A programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V, and the I/O supply range is 1.7V to 3.6V. It is used in automotive camera applications.

• Error detection of video/control data, retransmission of control data upon error detection
• High-immunity mode for robust control-channel EMC tolerance
• Crosspoint switch accepts any input bitmap, modes for encoded VSYNC and HSYNC
• Programmable output spread spectrum, 1.7V to 3.6V I/O supply
• Tracks spread spectrum applied at the parallel input
• ±8kV contact and ±15kV air IEC 61000-4-2 and ISO 10605 ESD protection
• Dedicated GPO for camera frame-sync trigger and other uses
• Clock frequency (parallel clock input) range from 16.66 to 58MHz
• Sleep-mode supply current is 40µA typical at (wake-up receiver enabled)
• Operating temperature range from -40°C to +115°C, 32-pin TQFN-EP package

Uwagi

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party