AT32UC3C0512C-ALUT

The AT32UC3C0512C-ALUT is a 32-bit AVR Flash Microcontroller features a floating point unit, FlashVault code protection, single or dual CAN interfaces, dual LIN interfaces, USB with OTG, PWM with dead-time insertion, a 16-channel 12-bit ADC with dual sample-and-hold circuit for simultaneous sampling of 2 signals, a 2-channel 1.5Msps 12-bit analogue DAC. It designed with the multi-layered databus, 64kb on-chip SRAM with dual interfaces, it offers an outstanding data throughput. The microcontroller event system provides a connection between on-chip peripherals to off-load the CPU, saves power consumption and provides a 100% deterministic response to external and internal events. The full-speed USB 2.0 device interface supports several USB Classes at the same time. The On-The-GO (OTG) host interface allows device like a USB flash disk or an USB printer to be directly connected to the processor. It features analogue functions like ADC, DAC, Analogue comparators.

• High performance, low-power 32-bit AVR® microcontroller
• Multi-hierarchy Bus System
• Internal High-speed Flash
• Internal High-speed SRAM, Single-cycle Access at Full Speed
• External Memory Interface on AT32UC3C0 Derivatives
• Interrupt Controller
• System functions
• Windowed watchdog timer (WDT)
• Asynchronous timer (AST) with real-time clock capability
• Frequency meter (FREQM) for accurate measuring of clock frequency
• Ethernet MAC 10/100Mbps interface
• Universal serial bus (USB)
• One 2-channel controller area network (CAN)
• One 4-channel 20-bit pulse width modulation controller (PWM)
• Two quadrature decoders
• Two 12-bit Digital-to-analogue Converters (DAC), with Dual Output Sample System
• 4 analogue comparators
• Six 16bit timer/counter (TC) channels
• 1 peripheral event controller
• 5 universal synchronous/asynchronous receiver/transmitters (USART)
• Serial peripheral interfaces (SPI) with chip select signals
• 1 inter-IC sound (I2S) controller
• Two-wire interfaces (TWI), 400kbps I²C-compatible
• QTouch® library support
• On-chip non-intrusive debug system

Ostrzeżenia

Recommended to apply a soldering temperature higher than 250░C, maximum of three reflow passes is allowed per component. Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.