MP6527GF-P

MP6527 is a ten-channel, half-bridge DMOS output driver with serial input control and integrated power MOSFETs. It can achieve up to 0.8A of output current (IOUT) across a wide 5.5V to 40V input voltage (VIN) range. The device’s ten half-bridges can be controlled separately via a standard serial data interface and each channel has various diagnostic functions. The MP6527 has very low quiescent current (IQ) in standby mode. Full protection features include short-circuit protection (SCP), overtemperature protection (OTP), undervoltage lockout (UVLO) protection, overvoltage lockout (OVLO) protection, and thermal shutdown with pre-warning. Diagnostic functions shorted output, open-load detection, overtemperature (OT), overvoltage (OV) and undervoltage (UV). The MP6527 requires a minimal number of readily available, standard external components and is available in a TSSOP-28EP package.

• High-side MOSFETs (HS-FETs) and low side MOSFETs (LS-FETs) connected in half-bridge configurations
• Typical 1.3ohm HS-FET and LS-FET RDS(ON)
• Low quiescent current (IQ) in standby mode
• Serial data interface
• Up to 5MHz serial interface clock frequency
• Compliance with 3.3V and 5V Systems
• Typically used in ADC motors, automotive and industrial applications

Uwagi

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.